Source Photonics launched a series of photoelectric conversion module and optical transceiver

On March 7, 2012, Source Photonics in OFC 10G EPON exhibition launched symmetric OLT and ONU optical transceiver series products. The transceiver product line includes an XFP package 10Gb/s EPON OLT. The OLT products in full compliance with the PR30 interface to the IEEE802.3av-2009 standard, and the IEEE802.3-2008 1000Base- PX20 standard. Based on the Source Photonics unique photonic integrated circuit technology, including 10Gb/s and 1Gb/s OLT transceiver and double the downstream transmitter, can choose 10Gb/s or 1Gb/s upper receiver, can be flexible for the 10G /1G EPON coexist in a PON network to provide flexible upgrade path. In order to support end-to-end integrated solutions, Source Photonics also announced that 10GEPON symmetric ONU transceiver. The transceiver products using SFP+ package, in full compliance with the PR30 interface to the IEEE802.3av-2009 standard, can satisfy various FTTB/FTTC/FTTN complex application environment. In addition, Source Photonics OFC 40GBASE-ER4 CFP will also show the photoelectric conversion module. The 40G optical module supports 40km transmission, Source Photonics 40G client products to the latest series, and Source Photonics had 10km transmission products into mass production. 40G/100G product support multi-rate applications include Ethernet, SONET/SDH and OUT data rate. All of the CFP modules are fully consistent with the MSA agreement and support MDIO interface and integrated DDM module.

The launch of Emcore 120 Gbps CXP active optical cable

Emcore company announced recently, its 120 Gbps CXP active cable began to accept the sample application. The active optical cable is designed for high performance computing ( HPC ), high-end Ethernet router and switch application and design. Emcore 120 Gbps CXP is a high density interconnect, portable, two-way active cable, with very low error rate of the transmission distance can reach 100 meters. The weight ratio of 26-AWG specifications of the cable bending radius of over 60% lighter, smaller than the latter 70% above. Compared with the traditional copper cable, in long distance case the active optical cable performance degraded significantly reduced. The product was easy to install, maintain and repair cable group, without tension server connector or the influence of adjacent cable. Emcore CXP is hot swap, according to CXP agreements and meet RoHS 6/6 standards. Emcore said Connects Calbes series products are very high price to provide optical connection service, can reduce the high speed of computer network installation and maintenance cost, supports large capacity computer cluster formation, particularly suited to the need for a long distance transmission system.

GigOptix 100G TFPS modulator start of production

GigOptix recently announced that 100Gbps MZM series of products shipped to the European military / aerospace customers, LX8901 series is the use of GigOptix proprietary TFPS technology 100Gpbs DPSK MZ modulator. This device is unique in at a low driving voltage conditions can provide more than 65GHz bandwidth of light. LX8901 makes the field of microwave photonics a series of high frequency can be applied, such as remote antenna, RF beam, phased array radar, high frequency signal sampling and mixing, and those in the use of other modulation techniques, such as phosphate, lithium niobate crystal smoke is not applicable. The LX8901 compact shape and high bandwidth to make with aerospace and other military application requirements of the system solution possible. GigOptix Bothell general manager Eric Miller said, " we are glad to another TFPS modulator start of production to serve the military / aviation market. In addition, from recent shipments can be seen in new markets for our device is of interest, especially in microwave photonics, instrumentation and measurement, because the device high bandwidth in the super high speed condition to produce complex high fidelity signal. "

GigOptix started mass production of single channel 40G/100G optical network drive

Last Thursday, GigOptix announced its high-speed optical network application network drive products, GX6255 start of production. The product is used as a surface mount technology, and the maximum output voltage of 8Vpp single end MZM ( Mach-Zehnder Modulator ) regulating drive, the drive for the communications industry standard 40G RZ-DQPSK and 100G DP-QPSK optical transceiver module. GigOptix in 2010 December launch of this product. The GX6255 driver using surface mount technology ( SMT ), has the advantages of small volume, low power consumption. When the working speed is 32Gb/s, the output voltage peak at 8Vpp. The GX6255 driver for amplifying wave division multiplexing optical transceiver module and its light MZM modulator between the data signal, when the output voltage peak value is 7.5Vpp, its power consumption is only about 1.6 watts. " We are glad to GX6255 production begins, " GigOptix optical product line general manager and vice president said. With the arrival of " cloud computing, data migration to the network, coupled with the intelligent mobile phone and computer 's massive popularity, we see the terminal network users on the network bandwidth demand increasing. We drive products combined with the generalized dual channel 40G and 100G coherent system of transconductance amplifying receiver and 40Gb/s RZ-DQPSK system received signal amplifier for communication principle, GigOptix company so as to provide the market today network the widest bandwidth of 40G and 100G network solutions. "

Oplink launched a full set of SFP+ transceiver